Matriz de Tableros
Conexiones panel a panel — 17 registros.
| # | FROM PANEL | TO PANEL | CIRCUIT IDs | CONNECTION TYPE | CABLE COUNT | CABLE SPEC SUMMARY | ROUTE | STATUS SUMMARY | CRITICAL NOTES |
|---|---|---|---|---|---|---|---|---|---|
| 1 | P-02 (MCC) | P-01 (Main Panel) | SU-002 | PWR-AC | 1 circuit (L1/L2/L3+GND) | 3/0 AWG+ XHHW-2 | MCC to P-01 top entry — cable tray | WARNING | MCC NOT DESIGNED. Entire line blocked until utility service and MCC engineering completed. |
| 2 | P-02 (MCC) | P-04 (DC Drives) | DC-PWR-01, DC-PWR-02, DC-PWR-03 | PWR-AC | 3 circuits (3× L1/L2/L3) | 2/0 AWG XHHW-2 per circuit | MCC → cable tray → P-04 | PARTIAL | Dedicated breakers ~400A each (pending MCC design). DC-PWR-03 (Decoiler) motor HP completely unknown. |
| 3 | P-02 (MCC) | P-03 (AC890 Rack) | SU-010, AC890-PWR-RACK | PWR-AC | 1 circuit through TCI reactors | 250A+ estimated | MCC → cable tray → P-03 through TCI KDRH3L/KDRF2L | PARTIAL | Rack input breaker PENDING. FLA input for rack not calculated. |
| 4 | P-02 (MCC) | AC890PX | SU-011, AC-PWR-PX | PWR-AC | 1 circuit | ~250 MCM estimated | MCC → cable tray → AC890PX standalone | PARTIAL | Dedicated breaker size PENDING Parker manual. |
| 5 | P-01 (Main Panel) | P-04 (DC Drives) | SU-004, SU-005 (via P-01 bus) | PWR-AC | 2 circuits (pass-through from MCC bus) | 2/0 AWG XHHW-2 | P-01 to P-04 — cable tray | CONFIRMED | Input: 460V/336.6A 3PH each. Output: 500VDC/412A REGEN. |
| 6 | P-01 (Main Panel) | P-03 (AC890 Rack) | STO-002, PLC-001, AC890-IO | SAFETY + CTRL | STO: 6 runs #16 AWG + I/O bundle | #16 AWG shielded (STO); #18 AWG multiconductor (I/O) | P-01 dedicated safety conduit → P-03 | PARTIAL | STO FIRST function test before any motor. I/O individual conductors NOT mapped. |
| 7 | P-01 (Main Panel) | AC890PX | STO-003, AC890-STO-PX | SAFETY | 1 run STO A/STO B | #16 AWG shielded | P-01 → AC890PX cabinet | CONFIRMED | Critical for 300HP flattener motor. |
| 8 | P-01 (Main Panel) | P-05 (Console) | STO-001, ENET-06 | SAFETY + ENET | 1 E-stop circuit + 1 Ethernet cable | #16 AWG 2C safety + Cat5e/6 STP | P-01 → conduit → P-05 | PARTIAL | E-stop field wiring path not individually documented. PanelView IP unknown. |
| 9 | P-01 (Main Panel) | DL-205 | ENET-07 | ENET | 1 Ethernet cable (CB-0178/CB-1920) | Cat5e/6 STP RJ45 | P-01 Spider → cable → DL205 cabinet | CONFIRMED | IP 192.168.84.101 CONFIRMED. Only device with documented IP. |
| 10 | P-01 (Main Panel) | PF525 #1/#2 | ENET-08, ENET-09 | ENET | 2 Ethernet cables | Cat5e/6 STP RJ45 | Panel → PF525 locations (route unknown) | PARTIAL | IPs 192.168.182.180 and .118 documented. Machine assignment UNKNOWN. |
| 11 | P-04 (DC Drives) | MTR-01 (UNICO S/N 35748) | DC-MTR-01, DC-FLD-01, DC-ENC-01, DC-THERMO-01 | PWR-DC + SIG | 4 circuits: armature + field + encoder + thermocouple | 4/0 AWG (arm), #10 AWG (field), #18 AWG (enc/thermo) | P-04 → conduit → pit → JBOX-01 → JBOX-02 TB70-72 → Motor | PARTIAL | DO NOT invert polarity A1/A2. Measure field resistance 11.3 ohm. |
| 12 | P-04 (DC Drives) | MTR-02 (UNICO S/N 35749) | DC-MTR-02, DC-FLD-02, DC-ENC-02 | PWR-DC + SIG | 3 circuits: armature + field + encoder | 4/0 AWG + #10 AWG + #18 AWG | Same route as MTR-01 | CONFIRMED | Parallel field mode: 150V/5.5A. |
| 13 | P-03 (AC890 Rack) | Roll Motors #1-#6 | ROLL-01 to ROLL-06 | PWR-AC | 6 motor circuits | #4 to #10 AWG per motor HP | VFD rack → conduit → each roll motor | PARTIAL | Motor nameplates PENDING. HP from drive tags only. Cable sizes estimated. |
| 14 | AC890PX | MTR-300 (Flattener 300HP) | AC-MTR-300, SU-012 | PWR-AC | 1 motor circuit (U/V/W) | 350 MCM per phase (355A FLA) | AC890PX → conduit → pit → motor | CONFIRMED | BASE FREQ = 84Hz NOT 60Hz. DPFV blower MANDATORY. |
| 15 | P-03 (AC890 Rack) | Internal FireWire Chain | FW-001 to FW-006 | FW | 6 daisy-chain segments | IEEE 1394a shielded — IRREPLACEABLE | Internal VFD rack | CONFIRMED | Node sequence MANDATORY: PX(3)→1→4→5→6→7→8. DO NOT modify. |
| 16 | P-01 (Main Panel) | JBOX-01 to JBOX-08 | FD-001 to FD-010, JBF-001 to JBF-003 | FIELD + CTRL | 10+ field circuits | #12-18 AWG various | P-01 → conduit → field JBOXes | PARTIAL | JBOX-05 = ground distribution (FIRST). JBOX-06 = DANGER label. JBOX-03 high-density. |
| 17 | P-01 (Main Panel) | Solenoid Valves | SOL-001 to SOL-006 | CTRL | 6 solenoid circuits (110/120VAC) | #16 AWG 2C+GND | P-01 transformer → conduit → hydraulic manifold | PARTIAL | E33 ≠ J33 (open vs closed center). Parker requires 120V not 110V. Continental voltage UNKNOWN. |